Canon i865 Printer Continuous Ink System (Plus Ink) --Uni-KitCanon i865 continuous ink system compatible with Canon i865 Warning: This continuous ink system is designed for the specified printers. Do not try using this system on any other printers.
We are pleased to announce the addition of the Uni-Kit?Continuous Ink (UCI) System. The UCI System consists of a high-capacity ink reservoir (same as using between 5-8 ink cartridges per color) that is attached to a cartridge via secure tubing. The tubing acts as a vacuum to extract ink from the reservoir and keep the cartridge full of ink. Because of the large reservoir capacity, you can print for an extended period of time without running low right away. There is a red line on the reservoir to indicate when it is time to refill. Each C.I. System comes complete with easy-to-follow instructions, ink, and all accessories needed to successfully use the system. The included UCI cartridges have a permanent smart chip already installed, which will automatically reset itself when your printer power is turned off (for 5 seconds) and turned back on. No mess! No leaking! Not only do you get the Uni-kit Continuous Ink System but you will receive an an abundance of ink to get you started. For your convenience, there is a filter built into the ink tank, to prevent outside agents from contaminating and/or affecting the quality of your prints.
This item contains:
1 x Continuous ink system
1 x Instructions
1 x Pre-filled chambers of premium dye/UV resistant ink
Please read this before you purchase:
1.CIS Refill kits are non-returnable unless we have a mis-shipment (wrong refill kit versus what is ordered; wrong content of the box; missing colors in the box).
2.For the CIS , replacement will not be made if the CIS condition is as follows:
- returned with air breathers still on causing spill of ink all over the box;
- broken tubings due to improper installation;
- ink spilled all over the box; (must be shipped and packaged properly when returned;
- ink cartridges punctured and ink all over the box due to improper shipping;
- returned with no box (just the styrofoam wrapping contained);
- punctured refill bottles;
- 25% or more of the ink consumed when returned;
- incomplete accessories;
- returned past 3 months from time of delivery.
If you have any trouble in installing CIS to your printer, please email to ciss@uni-kit.com for technical support.
Note:Due to the nature of the CIS and CIS refill kits, we will charge 15% of restocking fee for all returns.
This picture is a reference picture, not the actual image of the item..
|
