Wondering how to login to or 192.168.o1? If your answer is yes then I am here to help you out. Whenever it comes to configuring routers or modem, you will need to login to the device using its default IP address, username and password.

However, there are quite a lot of users who are not aware of how to login to router using default IP addresses like So in case, if the same goes for you, then I am here to help you out. – 192.168.o1 Default Router Login Password

I will be sharing all the steps that you have to follow to login to your router. So let’s just head into the topic without wasting much of the time:

What is Router’s Default IP address?

Each and every router comes with its default IP address. Using this IP address, you can login to the router and configure it. Different router manufacturing companies use a different IP address for their router. Even there are many routers manufacturers which uses the same IP address.

Among them, the or 192.168.o1 is one of the most used IP address. There are quite a lot of router manufacturing companies uses this router. So no matter which router you have, trying this router IP would be a great choice.

However, you cannot access this router IP address with your network. Since, it requires you to connect the router’s network at first. And then only, it will let you login to your router.

So if you are setting up a new router, then you have to connect your computer to the router using a LAN cable. Then, you will need to launch any of your preferred web browsers and visit this IP address. Even, you can also use any wireless enabled device like your phone. Just make sure, you are connected to the router’s network.

However, apart from the default IP address, you will also need to enter the default username and password. So you can log in to your router. Luckily, most of the routers have admin as its default username and password. But this can vary from router to router.

Hence, the best way to figure out a router’s IP address, username and password is to flip up the router and look underneath it. Underneath of the router, it will have all the details that you need to configure the router. Such as default IP address, username and password, SSID, Mac address and other details.

Router Default Username, Password and default IP address

In case if you cannot find your router’s default username, password or router login IP address. Then you can look at this below chart. I have included most of the popular rotuers default IP address, password and username.

Router Manufacturer IP addresses Username Password
TP Link / admin admin / password
D-Link / admin admin
Linksys admin admin
Netgear admin admin
Netgear admin password
Digisol admin admin – 192.168.o1 Router Login Password

TP-Link Router Login using

If you are using a Tp Link Router, then you can configure your router by following these steps:

  1. First of all, ensure that you have connected to your PC to the router using a Lan Cable.
  2. Next, open a browser and type down in the address bar. You can also go to Tplinklogin.net admin login for the same.
  3. After that, a new page will open up. Over here, you have to enter your username and password. To get the username, you can look at the bottom of the router. Also, without your username and password, you won’t be able to login. – 192.168.o1 Router Login Password
  4. Once logged in, you are all set to configure your router. Over here, you will find all the settings like wireless, advanced and others.

Netgear Router Login

The default IP address of a Netgear router is Just make sure your computer is connected to the router, and you are good to go.

All you have to do is go to the IP address using a web browser and enter username and password. After that, you will get logged in, and you will be able to make whatever changes you want to pretty easily. Also check out Best Free Unlimited VPN Apps For Android

Login to ASUS wireless router

  1. First of all, connect your PC to your ASUS Router using a LAN cable.
  2. Then launch any of your preferred browsers and type down in the address bar and hit Enter.
  3. Next, you have to enter the default username and password (admin/admin).
  4. That’s it. Now you are all set to configure your router and make any changes that you wish to.

Login to Digisol router

If you are using a Digisol router, then the default IP address is To configure a Digisol router, you will need to type down in the address bar. After that, you have to use the default username and password to log in and you are all done.

I can’t access what should I do?

In certain cases, you may not be able to access or 192.168.o1. In this case, you have to consider that the cable you are using is damaged. So do consider changing it and then try to login to the default IP address again. You should also read How to Play PUBG After Ban?

Apart from this, you can also try connecting to the wifi connection and configure your router. In case, if the wifi also does not work for you, I would recommend you to reset the router and see if it works. To reset your router, you have to press the reset button available on your router, and you are good to go.

Final Words:

So that was all for or 192.168.o1 login guide. I hope with this guide, you will be able to login to your router without any issues. So go ahead and try out the above mentioned steps and see if you can log in to router or not. Also, if you have any more questions to ask, then do feel free to comment below and I will surely help you out with your query.

Previous articleChoose A Great Color Scheme For Your Website
Next article5 Things No One’s Going To Tell You About Hosting